Melt pressure transmitter : PT124B-112/112T
PT124B-112/112T Series Melt Pressure Transmitter can achieve the pressure and temperature measuring. The model PT124B-112T is with temperature-measuring transducer. This series adopt special material and alloy elastic membrane to low down temperature draft and improve accuracy. The zero & full span can be calibrated, with amplify signal be connected with PLC, and internal 80% calibration.
Specifications
Pressure range: 0-3.5MPa…0-150MPa(0-500psi…0-20000psi)
Over Pressure: 1.5 X FSO
Combined Error: ±0.25% FSO, ± 0.5% FSO (Including Linearity, Repeatability & Hysteresis)
Output: 4-20mA, 0-10V, 0-5V
Input Voltage: 10VDC; 24VDC
Repeatability: +/- 0.2%FSO
Bridge Resistance: Input: 345 Ohms minimum
Output: 350 Ohms +/- 10%
Internal Shunt Calibration (R-Cal): 80% FSO +/- 1%
Insulation Resistance: 200 megohms @ 100 Vdc
Max Diaphragm Temperature: 260℃
Mounting Torque: 500 inch/lbs. maximum
Standard Wetted Parts: Diaphragm coated 15-5 PH SST
Electrical connector: 6PIN connector
Process connector: 1/2″-20UNF, M14×1.5, M18×1.5 Optional
Over Pressure: 1.5 X FSO
Combined Error: ±0.25% FSO, ± 0.5% FSO (Including Linearity, Repeatability & Hysteresis)
Output: 4-20mA, 0-10V, 0-5V
Input Voltage: 10VDC; 24VDC
Repeatability: +/- 0.2%FSO
Bridge Resistance: Input: 345 Ohms minimum
Output: 350 Ohms +/- 10%
Internal Shunt Calibration (R-Cal): 80% FSO +/- 1%
Insulation Resistance: 200 megohms @ 100 Vdc
Max Diaphragm Temperature: 260℃
Mounting Torque: 500 inch/lbs. maximum
Standard Wetted Parts: Diaphragm coated 15-5 PH SST
Electrical connector: 6PIN connector
Process connector: 1/2″-20UNF, M14×1.5, M18×1.5 Optional