Melt Pressure Transducer : PT124G-126
PT124G-126 Series Melt Pressure Transducer ( Flange type ) adopts special construction design and excellent alloy elastic membrane to reduce the thermal draft and improve measurement accuracy . The zero & full span can be calibrated, with amplify signal be connected with PLC and 80% calibration inside. It has wide application of pressure measurement & control for melt-temp liquid for chemical and fiber equipment, polyester equipment, etc.
Specifications
Pressure range: 0-3.5MPa…0-150MPa(0-500psi…0-20000psi)
Over Pressure: 1.5 X FSO
Combined Error: ± 1.0% FSO , ± 1.5% FSO (Including Linearity, Repeatability & Hysteresis)
Output: 3.33 mV/V, 2mV/V
Input Voltage: 10VDC
Repeatability: +/- 0.2%FSO
Bridge Resistance: Input: 345 Ohms minimum
Output: 350 Ohms +/- 10%
Internal Shunt Calibration (R-Cal): 80% FSO +/- 1%
Insulation Resistance: 200 megohms @ 100 Vdc
Max Diaphragm Temperature: 350℃
Mounting Torque: 500 inch/lbs. maximum
Standard Wetted Parts: Diaphragm coated 15-5 PH SST
Process connector: Flange mounting