Programmable Transmitter : 6740
Signal converter 6740 is exceptionally versatile and accepts almost all common sensor inputs. You can configure it by PC. Transmitter front has configuration connector which connects adapter cable POL-RS232 to serial port of the PC. Menu based configuration program is easy to use. By hand held programmer 6790 you can easily control or configurate the transmitter in field conditions.
Small size converter is provided with detachable connectors which speed up installation and programming. Large sensor selection and other inputs as well as versatility reduce stocking costs significantly because the 6740 suits for most measuring applications.
|
|||
| inputs | Pt100 | ||
| Pt1000 | |||
| Thermocouples | |||
| V | |||
| K type infrared sensor | |||
| mA | |||
| mV | |||
| Ohm | |||
| input channels | 1 | ||
| measuring rate | 4 measurements / s |
|
|||
| outputs | mA | ||
| V |
|
|||
| connector model | 1.5mm², detachable | ||
| programming | MekuWin or 6790 | ||
|
|||
| supply voltage | 24 VDC: 20...28 VDC | ||
| current consumption | 40 mA |
|
|||
| dimensions | 22.5 x 60 x 75 mm (WHD) | ||
| maximum ambient temperature | 60°C | ||
| minimum ambient temperature | -10°C | ||
| case material | plastic | ||
| installation | 35 mm DIN rail | ||
| galvanic isolation |  |
|
|||||
 |
|
With DCS772 you can add a POL interface to your PC. POL interface is used to setup Nokeval devices supporting POL interface. |
|||
 |
|
Hand held programming device for Nokeval's devices. |
|||
 |
|
Scaling calculator for live teaching two points in a device that has Lo-Hi-style scaling. |
|||
Cr. : http://www.nokeval.com