Type 500 Electropneumatic I/P Transducer (E/P Transducer)

Control Air | I/P Transducer | View PDF

Converts current or voltage input signal to a linearly proportional output pressure. Low cost, open loop device provides accurate output for high reliability control applications.

Type 500 Electropneumatic Transducer (I/P, E/P)

Economical and reliable electrical conversion to pressure

The ControlAir Type-500X converts a current or voltage input signal to a linearly proportional pneumatic output pressure. This versatile instrument is designed for control applications that require a high degree of reliability and repeatability at an economical cost.

The Type-500X is available in two different versions. The lower range model is designed for standard process control applications which typically utilize a 3 to 15 psig output. The extended range unit provides up to 145 psig output for higher pressure industrial pneumatic and process control system requirements.

Specifications

	Low Output Range (Up to 30 psig)	High Output Range(Up to 120 psig)
Min./Max. Supply Pressure	Minimum - 3 psig (0.2 BAR) above maximum output Maximum - 100 psig (7 BAR)	Minimum - 5 psig (2 BAR) above maximum output Maximum - 150 psig (10 BAR)
Supply Pressure Sensitivity	<± 0.1% of span per 1.0 psig (<± 0.15% of span per 0.1 BAR)	<± .04% of span per 1.0 psig (0.07 BAR)
Terminal Based Linearity	<± 0.75% of span	<± 1.5% of span typical, ± 2.0% max.
Repeatability	< 0.5% of span	< 0.5% of span
Hysteresis	< 1.0% of span	< 0.5% of span
Response Time	Dependent on pressure range - typically less than 0.25 sec for 3-15 psig units
Flow Rate	4.5 scfm (7.6 m3/hr ANR) at 25 psig (175 kPa) supply 12.0 scfm (20.0 m3/hr ANR) at 100 psig (700 kPa) supply	20.0 scfm (34.0 m3/hr) at 150 psig (1050 kPa) supply
Relief Capacity	2 scfm (3.4 m3/hr) at 5 psig (35 kPa) above 20 psig (140 kPa) setpoint	7 scfm (3.4 m3/hr) at 10 psig (35 kPa) above 20 psig (140 kPa) setpoint
Maximum Air Consumption	.05 scfm (.07 m3/hr) midrange typical	.07 scfm (.14 m3/hr) midrange typical
Media	Oil free, clean dry air filtered to 40 micron
Temp. Range (Operating)	-20°F to +140°F (-30°C to 60°C)
Port Sizes	1/4 NPT(Pneumatic) 1/2 NPT(Electric)	1/4 NPT(Pneumatic) 1/2 NPT(Electric)
Weight	2.1 lbs. (0.94 kg)	2.1 lbs. (0.94 kg)

Ordering Information

		Output Range
Part Number	Input	psi	bar	Impedance
500-AA	4-20 mA	3-9	0.2-0.6	90 Ohms
500-AB	4-20 mA	9-15	0.6-1.0	90 Ohms
500-AC	4-20 mA	3-15	0.2-1.0	180 Ohms
500-AD	4-20 mA	3-27	0.2-1.9	220 Ohms
500-AE	4-20 mA	6-30	0.4-2.0	220 Ohms
500-AF	4-20 mA	1-17	0.1-1.2	250 Ohms
500-BC	10-50 mA	3-15	0.2-1.0	70 Ohms
500-BD	10-50 mA	3-27	0.2-1.9	85 Ohms
500-BE	10-50 mA	6-30	0.4-2.0	85 Ohms
500-AG	4-20 mA	2-60*	0.1-4.0	225 Ohms
500-AH	4-20 mA	3-120*	0.2-8.0	260 Ohms
500-BF	0-60 mA	2-120*	0.1-8.0	220 Ohms

Cr : http://www.controlair.com/