Counter/Timer :LE7M-2

W72×H72mm, Weekly/Yearly Timer

W72×H72mm, Weekly/Yearly Timer

Weekly/Yearly timer LE7M-2 allows various weekly or yearly unit time setting and control by user. It includes 2 independent control output (Relay), and is easy to set and check the detail of program setting. Also, various mounting methods are supported including flush, surface and DIN RAIL in order to increase user’s convenience.

*Easy to check and change the program setting.
*Customizable weekly or yearly unit time setting and control by user
*Includes Daylight Saving Time function
*2 Independent control output.(Relay)
*Flush and Surface mounting are in one unit.
*Enable to mount on DIN Rail with base plate.

Specification Table

Model		LE7M-2
Power supply		100-240VAC 50/60Hz
Allowable voltage range		90 to 110% of rated voltage
Power consumption		4.2VA
RETURN Input		Short-circuit or open by switch or relay
Timing program		48 steps for weekly, 24 steps for yearly
Operation mode		ON/OFF mode, cycle mode, pulse mode
Mounting		Front panel, surface, DIN rail
Time deviation		±15sec. /month(25℃) (±4sec. / week)
Temperature error		0.01% ±0.05sec.
Memory protection		Over 5 years(at 25℃)
Control Output	Contact type	SPDT(Single Pole Double Throw)
	Contact capacity	250VAC 10A resistive load
	Output number	Independent 2 output(1c × 2)
Relay life cycle	Mechanical	Min. 5,000,000 operations(Switching capacity 30 times/minute)
	Electrical	50,000 operations
Insulation resistance		Min. 100MΩ(at 500VDC megger)
Dielectric strength		2000VAC 50/60Hz for 1 minute
Noise strength		±2kV the square wave noise(pulse width : 1㎲) by the noise simulator
Environ-ment	Ambient temperature	-10 to 55℃, storage: -25 to 65℃
	Ambient humidity	35 to 80%RH, storage: 35 to 80%RH
Unit weight		Approx. 272g

※Environment resistance is rated at no freezing or condensation.

Cr. : http://www.autonics.com/