Counter/Timer : FX/FXH/FXL Series

DIN W72×H72, W48×H96, W144×H72mm Counter/Timer

DIN W72×H72, W48×H96, W144×H72mm Counter/Timer

DIN W72×H72, W48×H96, W144×H72mm of up/down counter/timer FX/FXH/FZL series provides 1cps/30cps/2kcps/5kcps of counting speed and supports NPN/PNP input selecting function equipped counter/timer. Also, the series is possible to set various up/down counting modes so that various user applications can be supported. Diverse size option is another feature of this series to increase user convenience.

*Easy to select 36 kinds of input operation mode
or 20 output operation modes by internal DIP switch.
*Upgraded counting speed : 1cps/30cps/2kcps/5kcps
*Selectable voltage input(PNP) or No voltage input(NPN)
*Addition of Up/Down input mode
*Wide range of power supply :
100-240VAC 50/60Hz, 12-24VAC/DC
*Selectable Counter/Timer by internal DIP switch
*Various time range
*Built-in Microprocessor

Product Overview

Specification Table

Model	Single preset		FX4S	—
	Indicator		—	FX5S-I
Digit			4diglt	5digit
Digit size			W3.8xH7.6mm	W4xH8mm
Power supply			100-240VAC 50/60Hz, 12-24VAC/DC(Optlon)
Allowable voltage range			90 to 110% of rated voltage
Power consumption			• Indication type : Approx. 4.7VA (240VAC 60Hz), Approx. 5.6VA (24VAC 60Hz), Approx. 2.8W(24VDC) • Single preset : Approx. 5.7VA(240VAC 60Hz), Approx. 4.5VA(24VAC 60Hz), Approx. 3W(24VDC)
Max. counting speed for CP1, CP2			Selectable 1cps/30cps/2kcps/5kcps by internal DIP switch
Min. Input signal width	INHIBIT input		Approx. 20ms
	RESET Input
Input	CP1.CP2 Input (INHIBIT)		Input logic is selectable [Voltage input] Input impedance : 5.4kΩ "H" level : 5-30VDC, "L" level : 0-2VDC [No-voltage input] Impedance at short-circuit : Max. 1kΩ, Residual voltage at short-circuit : Max. 2VDC, RESET input Impedance at open-circuit : Min. 100kΩ
	RESET Input
One-shot output time			0.05 to 5sec	—
Control output	Contact	Type	SPDT(1c)	—
		Capacity	250VAC 3A at resistive load	—
	Solid- state	Type	NPN open collector	—
		Capacity	30VDC Max. 100mA Max.	—
Memory protection			10 years(When using non-volatile semiconductor memory)
External power			12VDC±10% 50mA Max.
Insulation resistance			Min. 100MΩ(at 500VDC megger)
Dielectric strength			2000VAC 50/60Hz for 1 minute
Noise strength	AC power		±2kV the square wave noise(pulse width : 1㎲) by the noise simulator
	DC power		±500V the square wave noise(pulse width : 1㎲) by the noise simulator
Vibration	Mechanical		0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) In each of X, Y, Z directions for 1 hour
	Malfunction		0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes
Shock	Mechanical		300m/s²(Approx. 30G) in each of X, Y, Z directions for 3 times
	Malfunction		100m/s²(Approx. 10G) in each of X, Y, Z directions for 3 times
Relay life cycle	Mechanical		Min. 10,000,000 operations
	Electrical		Min. 100,000 operations at 250VAC 2A(resistive load)
Environ-ment	Ambient temperature		10 to 55°C, storage: -25 to 65°C
	Ambient humidity		35 to 85%RH, storage: 35 to 85%RH
Approval			UL
Unit weight			AC type : Approx. 147g, DC type : Approx. 153g	AC type : Approx. 137g, DC type : Approx. 143g

※Environment resistance is rated at no freezing or condensation.