Level Controller : DEC - 4U - 2WN
Electrode Type Level Controller
Application
This DEC-4U-2WN Series Level Controller gets signal from each point of the sensor installed in the tank and displays the level of the liquid in the tank as points.
Using a converter for 2-wire transmission, this changes contact signal to current.
LED display enables you to read the current status correctly and easily.
This is designed to control two alarms and one of control which activates the connected pump.
In the mode of supply, when the liquid goes down to reach LOW ALARM (or HIGH ALARM) set point, LOW ALARM(or HIGH ALARM) truns on.
And this activates the connected device. When the level goes up, and does not stop at STOP set point, HIGH alarm truns on, and this activates the connected device.
You can choose a mode of supply or drainage.
Features
▶ L.E.D Display.
▶ 2-Wire (Current Loop)
▶ 1ea Alram, 1ea Control.
General Specifications
| Indicate | (Red) L.E.D Lamp |
| Operating Temperature | 0℃ ~ 60℃ |
| Demensions | 52mm (Wide) , 84mm (High) , 132mm (Deep) |
| Relay Output - Max. Switching Current Capacitor | 1250VA, 150W |
| Relay Output - Max. Switching Voltage | 250VAC, 30VDC |
| Relay Output - Max. Switching Current | 5A |
| Material | Polcarbonate & A.B.S |
| ㆍPlan |
 |
Cr : http://www.dh34.com