Level Controller : DFC - 4U - 2WN
2-Wire Connect (Current Loop) 1-Pin Socket Type High/Low/Buzzer Alram Control On/Off L.E.D Lamp Indicating
Float Type Level Controller
Application
This DFC-4U-2WN Series Level Controller gets signal from each point of the sensor installed in the tank and displays the level of the liquid in the tank as points.
Using a converter for 2-wire transmission, this changes contact signal to current.
LED display enables you to read the current status correctly and easily. This is designed to control two alarms and one of control which activates the connected pump.
In the mode of drainage, if it does not stop at the HIHG set-point, HIGH alarm turns on.
If it does not stop at the LOW set-point, LOW alarm turns on.
Features
▶ L.E.D Display.
▶ 2-Wire (Current Loop)
▶ 2ea Alram, 1ea Control.
General Specifications
| Indicate | (Red) L.E.D Lamp |
| Operating Temperature | 0℃ ~ 60℃ |
| Demensions | 52mm (Wide) , 84mm (High) , 132mm (Deep) |
| Relay Output - Max. Switching Current Capacitor | 1250VA, 150W |
| Relay Output - Max. Switching Voltage | 250VAC, 30VDC |
| Relay Output - Max. Switching Current | 5A |
| Material | Polcarbonate & A.B.S |
ㆍPlan
Cr : http://www.dh34.com