Level Controller : DFIC - 4U

2-Wire Connect (Current Loop) DC 24V Power Supply Percent(%) Indicat High/Low Alram, Control

 

Float Type Level Controller     

 

Application

This DFIC-4U Series Level Controller gets 4-20mA current signal output from the sensor installed in the tank and displays the level of the liquid in the tank as percentage (0~100%) at 0.5 unit.

It is very much easy to install and adjust freely on-off switch of the pump at site.

Also, it is able to monitor the status at site without using meter.

User can select one 4~20mA Analog Output (Meter), two Alarm Relays, one Control Relay, or one Buzzer Relay as per user's purpose and circumstance.

You can change the alarm setting value by using the four keys on the front panel.

It is easy to read the values even in dark place or long distance for a 5-digit 7-segment LED is installed on the front panel Meter.

 

Features

 ▶ DC 24V Power Supply.

 ▶ Easy Control (On/Off).

 ▶ 2ea Alram, 1ea control.

 

General Specifications

Display
 
 5-Digit 8.0mm (0.315 Inch)
 High 7-Segment L.E.D
Display Update Rate  0.25 Sec
Transducer Supply  24 VDC , 59mA
Operating Temperature  0℃ ~ 60℃
Demensions  87mm (Wide) , 155mm (High) , 69mm (Deep)
Resolution   8 bit
Accuracy  less then 0.5%
Relay Output  -  Max. Switching Current Capacitor  1250VA, 150W
Relay Output  -  Max. Switching Voltage  250VAC, 30VDC
Relay Output  -  Max. Switching Current  5A
   
Material  Polcarbonate & A.B.S

 

ㆍPlan