Level Controller : DFIC - 4D
Float Type Level Controller
Application
This DFIC-4D Series Level Controller gets 4-20mA current signal output from the sensor installed in the tank and displays the level of the liquid in the tank as percentage (0~100%) at 0.5 unit.
It is very much easy to install and adjust freely on-off switch of the pump at site.
Also, it is able to monitor the status at site without using meter.
User can select one 4~20mA Analog Output (Meter), two Alarm Relays, or one Control Relay as per user's purpose and circumstance. You can change the alarm setting value by using the four keys on the front panel.
It is easy to read the values even in dark place or long distance for a 5-digit 7-segment LED is installed on the front panel.
Features
▶ DC 24V Power Supply.
▶ Easy to install.
▶ 11-Pin Socket Type .
▶ 2ea Alarm, 1ea Control.
General Specifications
| Display |
3 Digit 8.0mm (0.315 Inch) High 7-Segment L.E.D |
| Display Update Rate | 0.25 Sec |
| Transducer Supply | 24 VDC , 59mA |
| Operating Temperature | 0℃ ~ 80℃ |
| Demensions | 52mm (Wide) , 84mm (High) , 132mm (Deep) |
| Resolution | 8 bit |
| Accuracy | less then 0.5% |
| Relay Output - Max. Switching Current Capacitor | 1250VA, 150W |
| Relay Output - Max. Switching Voltage | 250VAC, 30VDC |
| Relay Output - Max. Switching Current | 5A |
| Material | Polcarbonate & A.B.S |
ㆍPlan
Cr : http://www.dh34.com