Load Cell : PD Series

Information

PD series load cells are made from special anodized aluminium alloy that isolates it from corrosion and industrial environments. Work with bending beam principle. PD type load cells were designed for tension or compression or for both tension and compression applications. It is highly resistant to eccentric loading. The platform sizes are 20 cm x 20 cm. The sensing element is covered with silicone that protects it from dust and humidity.

General Applications
- Packaging and filling machines
- Counter scales
- Market scales

Capacity
The PD series load cells are produced in 5,10,20,50 kg capacities.

Tachnical specification

Type	PLATFORM SERISI(PL,PD,MT)
Accuracy class	C1
Capacity (Emax)	1,2,3,10,20,30,50,100Kg
Minimum dead load	0% R.O
Rated output R.O	2,0 mV/V
Maximum number of load cell interval Nmax	1000
Vmin	Emax/4000
Emax / Vmin	4000
Combined error	0,030 %R.O
Minimum dead load output return (MDLOR)	<0,0500 %R.O
Zero balance	1 %R.O
Temperature effect on zero	<< 0,0175 %R.O/5°C
Temperature effect on output	< 0,0085 %R.O/5°C
Compensated temperature range	-10 /+40 °C
Temperature range safe	-30 /+70 °C
Maximum safe central overload	150 %R.O
Ultimate central overload	300 %R.O
Excitation	5 V
Input impedance	395±20 Ω
Output impedance	350±3 Ω
Insulation resistance	>1000 MΩ
Construction	Adonized aluminium alloy
Environmental protection	IP66
Cable type	4x0,22 mm
Cable length	MT(1,2,3 kg): 30cm PL(10,30,50,100): 3m PD(10,20,50): 1m
Platform size	MT 10x10 cm PL 40x40 cm PD 20x20 cm

Technical Drawing

PD Series Load Cell Catalog

Cr : http://www.pulselectronic.com/