Indicators & Controllers : LI40-1001
PodView™ Level Indicator
Application
The general purpose indicator displays tank level or volume in engineering units with 1-4 relay status indicators, and is compatible with any EchoPod level sensor that's been configured with WebCal 6 software and updated to V50 firmware or higher. Powered by EchoPod, the field mount indicator may be located up to 4.5m (15') from the sensor. PodView requires no programming. The indicator repeats the measured value, applicable relay status and set point configuration of the attached sensor. If EchoPod relay set point changes are desired, they can be easily made through the field indicator.
Features
Indicates tank level or volume and relay status
Enables EchoPod relay set point changes in the field
Powered directly by the attached EchoPod sensor
Repeats EchoPod sensor data with no programming
Corrosion resistant enclosure with NEMA 4 faceplate
Literature
Specifications
| Display type: | LCD, 6-digit with 4 relay indicators |
| Display units: | Engineering |
| Display output: | -99999 to 999999 |
| Character height: | 0.374" (9.5mm) |
| Decimal point: | Fixed |
| Dot indication: | Relay status |
| User interface: | Three button |
| Sensor input: | (1) EchoPod sensor |
| Supply voltage: | Provided by EchoPod |
| Operating temp.: | F: -4° to 140° C: -20° to 60° |
| Cable type: | 4-conductor, #22 AWG |
| Cable length: | 6' (1.8m) |
| Cable jack. mat.: | Polyurethane |
| Enclosure rating: | Nema 4 (IP65) faceplate |
| Enclosure mat'l: | Polycarbonate |
| Enclosure type: | Panel mount |
| Button material: | Silicon rubber |
| Classification: | General purpose |
| Compliance: | CE (pending) |
Cr : http://flowline.com