Counters/Electronic : SLIK-94
The device has two independent counting inputs that can operate in various configurations. A programmable function input enables changing the operating mode of the counting inputs (up-down and down-up or quadrature) or stopping the count. The SLIK-94 counter features an independent reset input. It has 0, 2 or 4 relay (or OC) outputs with programmable activation thresholds, which can be used to control external equipment.
Parameters
| Inputs | pulse, 2 x counting; 1 x programmable, 1 x reset |
|---|---|
| Counting mode | adding, subtracting or quadrature |
| Display | LED, red (green on request), 6 x 13 mm high |
| Input levels | low: 0 V ÷ 1 V; high: 10 V ÷ 30 V |
| Input frequency | electronic: 10 kHz / 5 kHz (for quadrature); contact: max. 90 Hz (adjustable filter) |
| Data memory | non-volatile memory, EEPROM type |
| Displayed values range | -99999 ÷ 999999 |
| Power consumption | for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 4,5 VA; 19V ÷ 50V DC power supply: max. 4,5 W |
| Output | 0, 2 or 4; relay 1A/250V AC (cosφ=1) or OC 30mA/30VDC/100mW; power supply output: 24V DC +5%, -10% / max. 100 mA |
| Communication interface | RS-485, 1200 ÷ 115200 bit/s, 8N1 and 8N2, Modbus RTU |
| Protection class | IP 65 (front), available additional frame IP 65 for panel cut-out sealing; IP 20 (case and connection clips) |
| Reset | reset: button and electric, with keylock |
| Case material | NORYL-GFN2S E1 |
| Operating temperature | 0°C ÷ +50°C |
| Storage temperature | -10°C ÷ +70°C |
| Power supply | 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC |
| Case | panel mounting |
| Panel cut-out dimensions | 90,5 x 43 mm |
| Case dimensions | 96 x 48 x 100 mm |
| Installation depth | min 102 mm |
| Typical applications | Measuring the length of the material being wound, featuring control of the cutting knife drive system according to set parameters, control of the material drive system, as well as alarm signalling. |